Peg Perego Viaggio Shuttle ISOFIX booster seat for 125 to 150 cm Crystal Black

-Peg Perego Viaggio Shuttle -car seat booster with ISOFIX -for children 125–150 cm tall -forward-facing installation -child secured with the vehicle’s three-point seat belt -ISOFIX connectors stabilize the seat and do not replace the seat belt -ex-display condition, very good; packaging may be damaged or replaced The Peg Perego Viaggio Shuttle in Crystal Black is a car seat booster for children 125–150 cm tall. The seat is used forward-facing in a vehicle approved for this type of installation. The child must always be secured with the vehicle’s three-point seat belt; the ISOFIX connectors provide additional stability and do not replace the seat belt. Before use, check that the seating position in your vehicle is compatible with the vehicle manual and the complete Viaggio Shuttle manual. The fabric seat and armrests help your child sit comfortably during the journey. Detailed belt routing and usage restrictions are described below and in the original Polish manual. Care and safety Clean and maintain the product according to the manufacturer's Polish manual. Check the sewn-in label for instructions on cleaning the upholstery. Do not use chlorine bleach, iron, dry-clean, use solvents to remove stains, or tumble-dry. Wipe the plastic parts periodically with a damp cloth; store the product in a dry place. Use as intended and according to the manufacturer's recommendations. Check the product regularly; discontinue use if it is damaged. Thank you for choosing a Peg Perego product. Car seat Viaggio Shuttle • Approved in accordance with European ECE/UN Regulation R129/03 for children from 125 to 150 cm tall (aged approximately 6 to 12 years). • This car seat is a child restraint system of the i-Size booster cushion type. It has been approved in accordance with ECE Regulation No. 129 for use on seats in vehicles “compatible with i-Size”, as specified by the vehicle manufacturer in the owner's manual and maintenance instructions. • The car seat may only be used in approved vehicles equipped with a three-point seat belt approved in accordance with ECE/UN Regulation R16 or an equivalent standard. • IMPORTANT: use of a two-point or lap belt is not permitted. WARNING • Read the instructions carefully before use and keep them in a suitable place for future reference. Failure to install the car seat correctly may endanger the child. • Ensure that the three-point seat belt used to secure the car seat is always tight and not twisted. • Ensure that the lap belt is positioned as low as possible to properly secure the pelvis. • Do not use the car seat if it is damaged or missing parts, if it is second-hand, or if it has been subjected to severe stress in an accident, as it may have hidden but extremely dangerous structural damage. • Do not use accessories that have not been approved by the manufacturer or the relevant authorities. Do not make any modifications to the product. • Do not leave the car seat in a vehicle exposed to direct sunlight. • Never leave a child unattended in the car seat. Supervise them even while they are asleep. • Do not leave a child unattended in a vehicle, even for a short time. The temperature inside the car can change suddenly and become dangerous for the child inside. • Do not use the car seat without its fabric cover. The cover must not be replaced with one that has not been approved by the manufacturer, as it is an integral part of the car seat and a safety component. • The Viaggio Shuttle must be assembled and installed by adults, keeping the child away from the product. • Never hold a child in your arms or place them outside the car seat while travelling in a vehicle. In the event of sudden braking, even at low speed, the child could easily be thrown forward. • When adjusting the seat, avoid putting your fingers into the mechanisms. Ensure that the moving parts of the car seat do not come into contact with the child's body. • In the vehicle, pay particular attention to luggage or other objects that could injure a child in the car seat in the event of an accident. • Do not use any installation method other than those specified. This could cause the child to come out of the seat. • Never take a child out of the car seat while the vehicle is moving. • Make sure that the car seat is not blocked by a moving part of the vehicle seat or by a door. • If in doubt, contact the manufacturer or car seat retailer. • This product is identified by a serial number on the approval label on the underside of the car seat. • Do not remove adhesive or sewn-on labels. Doing so may cause the product to no longer comply with standards. • For repairs, replacement parts or product information, contact the after-sales service department. Contact details are provided on the last page of this manual. • If the car seat is not occupied while in a vehicle but is attached to the vehicle's ISOFIX anchors, it may be left in the vehicle. If the ISOFIX anchors are not in use, they should be removed from the vehicle seat. Otherwise, they could pose a risk to other passengers in the event of an accident. • If the product is second-hand, check that it is the latest model, comes with an instruction manual and is fully functional. An outdated product may not comply with standards due to the natural ageing of materials and updates to regulations. If in doubt, contact the manufacturer's service centre. IMPORTANT 2• The Viaggio Shuttle must be installed forward-facing. • Do not install the Viaggio Shuttle on seats that face backwards or sideways to the vehicle's normal direction of travel. • It is always safer to install the car seat on the rear seat, on the passenger side. • If installing the car seat on the front seat, it is recommended to position it as far away from the dashboard as possible. The Isofix connectors provide greater stability and better car seat security, but they do not replace the seat belts. child in the Viaggio Shuttle car seat 10• Place the child in the car seat as shown in the illustration, making sure the seat does not move. Secure the child with the vehicle seat belt as shown in the figure. Fasten the belt, making sure it is correctly positioned. Route the belt as shown in the figure: pass the lap section UNDER the armrest and the diagonal section OVER the armrest. Brush the upholstered parts to remove dust. • Instructions for cleaning are on the label sewn into the seat upholstery (item 11). • Do not use chlorine bleach. • Do not iron. • Do not dry-clean. • Do not remove stains with solvents. • Do not tumble-dry. • The product requires minimal maintenance. Cleaning and maintenance should only be carried out by adults. • Keep all moving parts clean. • Wipe the plastic parts periodically with a damp cloth. Do not use solvents or similar products. • Brush fabric parts to remove dust or wash them according to the instructions in the relevant section. • Protect the product from the elements, such as water, rain or snow. Continuous and prolonged exposure to sunlight may cause the colours of many materials to fade. • Store the product in a dry place. FAQ What height is this booster for? The manufacturer specifies a height of 125–150 cm. The age range of approximately 6–12 years is indicative; follow the height range and instructions. Does ISOFIX replace the vehicle seat belt? No. The child must be secured with a three-point seat belt; ISOFIX stabilizes the seat. Do not use a two-point belt or a lap belt alone. Can the booster be installed rear-facing? No. The instructions require forward-facing installation and prohibit use on seats facing backwards or sideways. Specifications Dispatch time: 24 hours Safety documents Manufacturer's Polish manual — Viaggio Shuttle / warnings: https://www.pegperego.com/media/catalog/product/download/VIAGGIO-SHUTTLE-FI002501I371.pdf Manufacturer's Polish manual — Viaggio Shuttle / mounting: https://www.pegperego.com/media/catalog/product/download/VIAGGIO-SHUTTLE-FI002501I371.pdf Manufacturer's Polish manual — Viaggio Shuttle / care: https://www.pegperego.com/media/catalog/product/download/VIAGGIO-SHUTTLE-FI002501I371.pdf